REPLACEMENTS

Chest skin as a spare part for ATLAS (P75) more

A spare set consisting of a cervix and a vulva for the birth simulator, P90 Basic. more

The Complete Baby set for birth simulators, P90 Basic and Pro, contains a fully jointed baby (49 cm / 19,29 inch - 1,06 kg / 2,3 lbs), an umbilical cord with 2 clamps and a placenta. In connection with the birth simulator, fetal positions and ... more

The spare abdominal cover set for the Gynecologic Skills Trainer P91D (1023305). Made of 3B Scientific SKINlike high-quality silicone, this abdominal wall will offer during palpation and bimanual examination a realistic look, feel and texture ... more

For use with Chester Chest with Standard Arm - 1021821 The Standard Arm for Chester Chest has a dual lumen 5Fr PICC (Peripherally Inserted Central Catheter) exiting the basilic vein from the inner bicep area and a pre-positioned 20g IV ... more

Skin Graft Wound Board is a realistic patient simulation model for educating various individuals about skin grafts and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model. The ... more

Dehisced Wound Board is a realistic patient simulation model for educating various individuals about dehisced wounds and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model. ... more

This Incision Wound Board is a realistic patient simulation model for educating various individuals about Incision wounds and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model ... more

Replacement Fibre Optic Cable for Spectrometer S (1003061) Fibre cable: 1 mm diameter, 2 mm with coating more

more

more

Replacement foreskin for Willi, Remedy's male catheterization trainer.  Available in light or dark skin tone. SKU: REM-CATH-FOR-01 ( light skin tone) REM-CATH-FOR-01D (dark skin tone) more

Use Gravity Boots with the 3009454 One Size Fits Most: Boot straps adjust to ankles varying several inches in diameter , XL Gravity Boot also available note in comment box during checkout Flexible Shell for Comfortable Fit: Tough ... more

Clear ultrasound gel couplant for therapeutic and diagnostic ultrasound and neuromuscular electrical stimulation. Includes 1, 5 liter container of ultrasound gel. Alcohol and salt free as well as non corrosive. Also available in a case ... more

Replacement insert for P11 Patient Care Manikin II. Simple male genital without rectum more

Spare part: Drive belt for Wimshurst Machine more

Spare part: Displacement Cylinder for Stirlingmotor GT04 more

Spare part: Drive belt for Stirling engine G more

Flexible optical fibre for infrared laser light. Replacement part for 3B Laser 1017714 & 1008814 more

Replacement for: C15 / 1000222 - Brain, 2 Parts C15/1 / 1000223 - Introductory Brain C16 / 1000224 - Brain, 4 Parts C17 / 1000225 - Brain, 8 Parts C18 / 1000226 - Brain, 5 Parts C20/ 1017868 - Brain, 9 ... more

New, worldwide unique spine and skeleton stand! This stand... • Can be placed on the floor • Or mounted on a wall! • Made of nickel-plated steel This stand works great for 3B Scientific spines and hanging skeleton models ... more

The neuron cell body depicts a part of the human nervous system in colorful anatomical detail. The neuron model features a typical neuron body with cell organelles, for example mitochondria and many other characteristics of the human cell, ... more

This myelin sheath model shows the glial cells which build the insulating layer around the axons of the central nervous system. The myelin sheath model is a great addition to any lesson about the human nervous system. more

This section of the nervous system depicts a Schwann cell with sectioned core. The model depicts the schwann cell in colorful anatomical detail. The schwann cell model is a great addition to any lesson on the human nervous system. more

The motor end plate model depicts the neuromuscular junction with striated muscle fiber. The motor end plate of the human nervous system is depicted in colorful anatomical detail. The motor end plate model is a great addition to any lesson ... more

The synapse model features the endoplasmic reticulum, mitochondria and the membranes of the synaptic gap. Also depicted by the synapses model are 5 smaller relief models of the main synapse variations. This synapse model is a great addition ... more

2 part lower incisor tooth with longitudinal section. This lower incisor tooth is an accurate representative of adult dentition. The D10 series range from 23-29 cm high. more

This 2 part lower canine tooth has a longitudinal section. The lower canine tooth is an accurate representation of adult dentition. The D10 series range from 23-29 cm high. more

This model is the Lower Single-Root Pre-Molar tooth. The Lower Single-Root Pre-Molar tooth is an accurate representation of adult dentition. The D10 series range from 23-29 cm high. more

This 2 part lower twin-root molar has a longitudinal section. The Lower Twin-Root Molar displays cavities. The tooth is a accurate representation of adult dentition. The D10 series range from 23-29 cm high. more

The upper triple-root molar tooth is 3 part with longitudinal sections. The tooth has cavity inserts. The upper triple-root molar tooth is an accurate representation of adult dentition. The D10 series range from 23-29 cm high. more

This upgrade kit easily converts a P11/1 Patient Care Manikin Basic to a P10/1 Pro version. Save money and upgrade your patient care manikin for more learning and teaching opportunities! The kit includes: Lung Bladder ... more

High-quality, lifelike and anatomically correct specimens of a house mouse and of a mouse skeleton,which have been prepared by technicians who have been trained at the highest level. Only in this way isit possible to ensure the durability of ... more

Bone preparation of a pigeon skeleton and, for comparison, a pigeon that is prepared to be lifelike and covered with real feathers. The longevity of the specimen is assured thanks to the frst-class preparation work. In display case. Dimensions ... more

Transparent plastic trough. more

As a substitute for the electrochemistry equipment set. Dimensions: 76 mm x 40 mm more

As a substitute for the electrochemistry equipment set. Dimensions: 76 mm x 40 mm more

Set of 5 carbon plates measuring approx. 76 x 40mm. Equipment Set sold separately under code 1002711. more

Diaphragm with 4 Multiple Slits and Gratings. Photographic diffraction objects in a slide frame. Dimensions: 50x50 mm² Slit width [mm]: 0.15 Slit spacing [mm]: 0.25 more

Diaphragm with 3 ruled gratings. Photographic diffraction diffraction objects in a slide frame. Dimensions: 50x50 mm² Line count (cm-1): 20; 40; 80 Lattice constant (mm): 0.50; 0.25; 0.125 more

Spare or replacement rubber belt for a Van de Graaff generator (U15300-115; U15300-115). Specifications: Length: 930 mm Width: 50 mm more

' data-item-price="61.0000" data-href="https://www.3bscientific.com/ca/plane-mirror-component-of-optics-kit-for-whiteboard-1002984-u15510-3b-scientific,p_171_1183.html" > Application Area: This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ). Product ... ' data-item-price="61.0000" href="https://www.3bscientific.com/ca/plane-mirror-component-of-optics-kit-for-whiteboard-1002984-u15510-3b-scientific,p_171_1183.html">more

Application Area: This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ). Product ... more

Application Area: This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ). Product ... more

Application Area: This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ). ... more

Application Area: This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ). Product ... more

Application Area: This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ). ... more

Application Area: This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ). Product ... more

Application Area: This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ). Product ... more

Slotted brass weights on holder comprising 3 sets with 2x 5 g, 2x 10 g, 2x 20 g, 3x 50 g. more