ÉRZÉKELŐK A FIZIKÁHOZ

A differenciál feszültség szenzor (1022539) -10 és +10 V közötti feszültségek mérésére szolgál. A széles bemeneti feszültségtartománynak ... tovább

Thermocouple Sensor The thermocouple sensor is capable of measuring temperatures in two ranges: -200 to 1300 °C (wide range) and -20 to 110 °C (narrow range) The desired range is selected by a switch integrated on ... tovább

Infrared photo gate for triggering a digital interface or a digital counter (U8533341). For time measurements in experiments on free fall, motion on a track or pendulum oscillations and for counting pulses. It can be operated in internal ... tovább

Szenzor a 3B NETlog adatgyűjtőhöz vagy egy digitális számlálóhoz mozgó tárgyakkal kapcsolatos idők mérésénél. Mozgó tárgyakon sötét é ... tovább

Adapterdoboz a fénykapu (U11365) és a lézerreflexiós szenzor (U8533380) külső digitális számlálóhoz történő csatlakoztatásához. Tartalmaz egy 12 V AC tá ... tovább

The relative pressure sensor FW is used to measure relative pressures. The sensor is equipped with two measuring chambers via whose terminals pressure diff erences can be measured. Range: 0 − ±100 hPa Accuracy: ± 1% Hose shaft: 4 ... tovább

Szenzor a relatív nyomás mérésére pl. folyadékoszlop hidrosztatikai nyomása, vagy nyomáskülönbségek a Stirling motor G-ben. Mérési tartomány: 0 ... tovább

Az elmozdulás szenzor FW periódikus / oszcilláló mozgások rögzítésére használható, melyek egy forgó tartón lévó madzagon keresztü ... tovább

Magnetic field sensor FW ± 2000 mT is used to measure magnetic flux density in the tangential direction. Located on the tip of the probe is a Hall sensor with an output signal proportional to the operating voltage. The sensor is equipped ... tovább

Temperature sensor for the measurement of temperatures on the copper tubing of a heat pump (P-1000819 / P-1000820). Temperature sensor shaft made of rust-proof stainless steel. Tip with matching copper terminal. Can be used in conjunction ... tovább

Motion detector (for WiLab and VinciLab) The Motion detector BT55i is a sonar device that emits ultrasonic pulses, which reflect off an object. The sensor measures the time it takes an ultrasonic pulse to travel from the sensor to the object ... tovább

Ezt az Áramerősség szenzort kifejezetten nagyon alacsony és pontos áram mérésére tervezték. Különböző kísérletekben használható, mint ... tovább

Magnetic field sensor FW ± 2000 mT is used to measure magnetic flux density in the axial and tangential directions. Located on the tip of the probe is a Hall sensor with an output signal proportional to the operating voltage. The ... tovább

Az €Motion egy ultrahangos mozgásérzékelő, amely közvetlenül USB interfészen keresztül csatlakozik a számítógéphez. Méri a szenzor és a tárgy k ... tovább

The thermocouple sensor 0135i measures temperatures in two ranges, which can be selected using the switch. The sensor uses a thermocouple type K, which consists of Chromega and Alomega wires that are welded together to form a measuring junction ... tovább

The Force plate 0364 measures forces of stepping, jumping and other human-scale actions. The Force Plate has two ranges, one for larger forces, and a more sensitive range for pushing experiments. Range: -800 ... 3500 N, -200 ... 800 ... tovább

The UVA sensor BT90i measures the intensity of ultraviolet radiation. This sensor consists of a broadband UV sensitive Schottky photodiode and responds primarily to UVA radiation. Range: 220 ... 390 nm   Can be used to: ... tovább

The light sensor 0513 measures light intensity and is sensitive to the visible light spectrum and also infrared. Because of its range the sensor is suitable for measurements in normal indoor situations. Range: 0.1 ... 10 W/m² ... tovább

The Voltage sensor BT02 is a low-cost, generic sensor that measures voltage. This sensor has a direct connection to the inputs of a measurement interface. It has two 4-mm plugs for easy connection. Range: -10 ... +10 V. Resolution ... tovább

The temperature sensor BT05i is a low-cost, general-purpose temperature sensor that can be used to measure temperature in the range of -40°C to 150°C, in liquids (water, mild acidic solutions) and air. The sensing element of the ... tovább

The Low-g Accelerometer BT10i can be used to study accelerations in onedimensional motions. The sensing element of the sensor is located inside the small round box, which can be mounted on a moving object. This is the best choice for most ... tovább

The High-g Accelerometer BT11i can be used to study larger accelerations in onedimensional motions. The sensing element of the sensor is located inside the small round box, which can be mounted on a moving object. Range: -25 g ... 25 ... tovább

The Charge sensor BT19i measures electrostatic charges. It can replace a traditional electroscope by showing not only the polarity of the charge but also performing quantitative measurements. The sensor has three operating ranges, which ... tovább

The Current sensor BT21i is a general-purpose sensor to measure currents in the range between -5 and 5 A. It has two 4-mm plugs for easy connection. The sensing element is a 0.04 Ω resistor connected between the red and black terminals. ... tovább

The conductivity sensor BT27i measures the ability of a solution to conduct an electric current between two electrodes. The conductivity sensor consists of a conductivity electrode and an amplifier. The sensor has three measurement ranges ... tovább