The Differential Voltage sensor (1022539) is designed for measuring voltages in the range between -10 and +10 V. With a wide input voltage range this sensor can be used to measure voltages in AC and DC circuits.
The sensor has differential ...
more
Thermocouple Sensor
The thermocouple sensor is capable of measuring temperatures in two ranges:
-200 to 1300 °C (wide range) and
-20 to 110 °C (narrow range)
The desired range is selected by a switch integrated on ...
more
Infrared photo gate for triggering a digital interface or a digital counter (U8533341). For time measurements in experiments on free fall, motion on a track or pendulum oscillations and for counting pulses. It can be operated in internal ...
more
Sensor for triggering a digital interface or a digital counter (U8533341) in time measurements on moving objects. Suitable for opto electronic scanning of light and dark markings on moving objects or in conjunction with a reflecting ...
more
Connector box for use in connecting light barrier (U11365) or laser reflection sensor (U8533380) to external digital counters. Includes plug-in power supply 12 V AC.
Input: 8-pin miniDIN socket
Output: Two 4-mm safety sockets
more
The relative pressure sensor FW is used to measure relative pressures. The sensor is equipped with two measuring chambers via whose terminals pressure diff erences can be measured.
Range: 0 − ±100 hPa
Accuracy: ± 1%
Hose shaft: 4 ...
more
The relative pressure sensor FW is used to measure relative pressures. The sensor is equipped with two measuring chambers via whose terminals pressure diff erences can be measured.
Range: 0 − ±1000 hPa
Accuracy: ± ...
more
Displacement sensor FW is used to record periodic / oscillating movements which can be registered via a cord on the cord roller. The sensor has a rotating cord roller and a built-in precision potentiometer.
Wheel: 24 mm Ø
Maximum ...
more
Magnetic field sensor FW ± 2000 mT is used to measure magnetic flux density in the tangential direction. Located on the tip of the probe is a Hall sensor with an output signal proportional to the operating voltage. The sensor is equipped ...
more
Temperature sensor for the measurement of temperatures on the copper tubing of a heat pump (P-1000819 / P-1000820). Temperature sensor shaft made of rust-proof stainless steel. Tip with matching copper terminal. Can be used in conjunction ...
more
Motion detector (for WiLab and VinciLab)
The Motion detector BT55i is a sonar device that emits ultrasonic pulses, which reflect off an object. The sensor measures the time it takes an ultrasonic pulse to travel from the sensor to the object ...
more
This Current Sensor is specially designed for measurements of very low and accurate currents. It can be used in various experiments such as:
• characteristics of a light bulb and a diode,
• measurements of internal resonance ...
more
€Motion is an ultrasonic motion detector that connects directly to a computer through a USB-port. The €Motion measures the distance between the sensor and an object.
Range: 0.20 m ... 6 to 10 m (depending on an object&rsquo ...
more
The Force plate 0364 measures forces of stepping, jumping and other human-scale actions. The Force Plate has two ranges, one for larger forces, and a more sensitive range for pushing experiments.
Range: -800 ... 3500 N, -200 ... 800 ...
more
The Motion Detector 0664 uses ultrasound to measure the distance between the sensor and an object. This Motion Detector has a digital BT connector and can be connected to digital inputs of the VinciLab interface.
Range: 0.2 .. 6 ...
more
The Voltage sensor BT02 is a low-cost, generic sensor that measures voltage. This sensor has a direct connection to the inputs of a measurement interface. It has two 4-mm plugs for easy connection.
Range: -10 ... +10 V.
Resolution ...
more
The temperature sensor BT05i is a low-cost, general-purpose temperature sensor that can be used to measure temperature in the range of -40°C to 150°C, in liquids (water, mild acidic solutions) and air. The sensing element of the sensor ...
more
The Low-g Accelerometer BT10i can be used to study accelerations in onedimensional motions. The sensing element of the sensor is located inside the small round box, which can be mounted on a moving object. This is the best choice for most ...
more
The High-g Accelerometer BT11i can be used to study larger accelerations in onedimensional motions. The sensing element of the sensor is located inside the small round box, which can be mounted on a moving object.
Range: -25 g ... 25 ...
more
The Charge sensor BT19i measures electrostatic charges. It can replace a traditional electroscope by showing not only the polarity of the charge but also performing quantitative measurements. The sensor has three operating ranges, which ...
more
The Current sensor BT21i is a general-purpose sensor to measure currents in the range between -5 and 5 A. It has two 4-mm plugs for easy connection. The sensing element is a 0.04 Ω resistor connected between the red and black terminals. ...
more
The Voltage sensor BT32i is designed for measuring voltages between -500 and +500 mV. The sensor has diff erential inputs; measurements can be done directly across circuit elements without the constraints of common grounding. It has two ...
more
The Force sensor BT42i measures pushing and pulling forces. It uses strain gauge technology. The sensor has two measurement ranges, which can be selected using a switch.
Range: -5 ... 5N, -50 ... 50 N.
Resolution (12-bit): 0.003 N ...
more
The Magnetic field sensor BT52i contains a Hall-element, which is sensitive to a magnetic field. It has two measurement ranges, which can be selected using a switch. The sensor is very suitable for measuring the magnetic field inside coils ...
more