Precision capacitor in plug-in housing with two plugs separated by 19 mm.
Capacitance: 10 nF
Tolerance: 2.5 %
Max. voltage (DC): 160 V
Max. voltage (AC): 100 V
more
Experiment Topics:
Ohm’s law
Parallel resistor circuits
Series resistor circuits
Unknown resistance
Potentiometers
Voltage dividers with no load
Voltage dividers with load
Discharge of ...
more
Plug-in board for assembling electrical and electronic circuits using components in plug-in housings. Features 4-mm sockets on the front and rear, each internally connected to a square of 9 sockets plus two continuous serial layouts each with ...
more
Components in plug-in housings with two plugs separated by 19 mm.
Max. temperature: 150°C
Type: NTC
Resistance (25°C): 2,2 kΩ
Resistance (100°C): 120 Ω
more
Set of 10 jumpers with printed lines showing the connection between the two plugs, for assembling circuits on the plug-in component board (1012902).
Max. permitted current: 25 A
Plug separation: 19 mm
more
Mechanical rocker switch with two switch positions on a square plug-in housing printed with the appropriate circuit symbol.
Internal mechanical coupling with two change-over switches for each of the three switch positions to be reproduced ...
more
Patch cord with multilam plug / jack
Length: 75 cm
Wire cross-section: 1 mm2
Continuous current: max. 16 A
Plug and jack: 4 mm ? (gold-plated)
Color: red
more
Symmetric, adjustable direct-voltage supply for electronic circuits, in particular, with operational amplifi er LM 741 (P-1012981), e.g. non-wired, inverting and noninverting operational amplifi er, adder and subtractor, diff erentiating ...
more