ЭФФЕКТ ЗЕЕМАНА – АКСЕССУАРЫ

Supplement for BRESSER Microscopy Camera: Focus lense 12 mm lens, for Microscopy Camera To create an imaging system for the experiment to demonstrate the Zeeman effect. еще

The red filter is mounted in a holder that can be screwed onto the focusing lens of the microscope camera. The red filter is used for observing the red cadmium line (λ = 644 nm) in the experiment normal Zeeman effect.  ... еще

A bandpass interference filter for the selection of the turquoise cadmium line (λ = 480 nm) for the anomalous Zeeman effect experiment. The bandpass interference filter is mounted in a holder that can be screwed onto the focusing lens ... еще

Stainless steel rod for microscope camera with ¼ inch thread. еще

!!!    OLD TEXT   !!! => to be updated before giong online !!! Недорогая цветная цифровая камера для подключения к компьютеру или ноутбуку через интерфейс USB. Камеру можно устанавливать прямо на окуляр любого ра ... еще

Optical precision bench with a triangular profile for research and demonstration experiments requiring maximum accuracy. Made of black, anodised aluminium. Tilt-proof, slip-proof, resistant to bending and twisting, equipped with a full-length ... еще

Optical rider for D-model precision optical benches (U10300, U10301 and U10302) for mounting optical attachments on a stem. For research and demonstration experiments requiring maximum accuracy. Made of black anodized aluminum. Thanks to ... еще

U shaped core with no yoke for use with Transformer Core D items. еще

Coil with 900 turns and thermal overload protection. For generating powerful magnetic fields in conjunction with the U-core (U8497215). Number of turns: 900 Inductance: approx. 34 mH Resistance: approx. 4.8 Ù (at room temperature ... еще

The electromagnet accessory provides a low-friction rotating bearing between the U-shaped core D (P-1000979) and the optical base D (P-1009733) and allows pole pieces and the base plate for the cadmium lamp (P-1021366) to be attached to the ... еще

One rail support and a single-point support with screws for adjusting optical bench. Made of black, anodized aluminium. Specifications: Length of rail support: 270 mm еще

Optical rider for D-model precision optical benches (U10300, U10301 and U10302) for mounting optical attachments on a stem. For research and demonstration experiments requiring maximum accuracy. Made of black anodized aluminum. Thanks to ... еще

Optical base used for mounting a U-shaped transformer core (U8497215) with coils and pole terminals for conducting experiments on the Faraday effect using precision optical bench D (U10300). Dimensions: 148x85x60 mm³ approx. еще

Lenses in black frame on stem. With a lens protection ring for preventing damage to the lens. Holder: 130 mm dia. Shaft: 10 mm dia. Focal length: +100 mm Diaphragm diameter: 50 mm еще

Precision glass polarisation filter, which is in a mounting on a steel rod and can be rotated on a ball-bearing. With angular scale marked in 1° intervals. Aperture: 38 mm dia. Extinction coefficient: >99.9 % at λ = 450 – 750 nm Height ... еще

Retardation plate (λ/4 platelet) made of plastic foil, rotatable on a ball-bearing in a holder on a stem. With an angle scale possessing 1° increments. Aperture:                    ... еще

For mounting on four-wavelength base (P-1021353). The combination of the two components allows for investigation of polarisation for doublet components in the case of a longitudinal Zeeman eff ect. An arrow marks the 0° setting for the ... еще