The Complete Baby set for birth simulators, P90 Basic and Pro, contains a fully jointed baby (49 cm / 19,29 inch - 1,06 kg / 2,3 lbs), an umbilical cord with 2 clamps and a placenta. In connection with the birth simulator, fetal positions and ...
more
For use with Chester Chest with Standard Arm - 1021821
The Standard Arm for Chester Chest has a dual lumen 5Fr PICC (Peripherally Inserted Central Catheter) exiting the basilic vein from the inner bicep area and a pre-positioned 20g IV ...
more
Skin Graft Wound Board is a realistic patient simulation model for educating various individuals about skin grafts and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model. The ...
more
Dehisced Wound Board is a realistic patient simulation model for educating various individuals about dehisced wounds and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model. ...
more
This Incision Wound Board is a realistic patient simulation model for educating various individuals about Incision wounds and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model ...
more
Replacement mercury tube for the following products:
Franck-Hertz tube with Hg filling and heating furnace (115 V /50/60 Hz);
item no. : 1006794 or 1023094
and
Franck-Hertz tube with Hg filling and heating furnace ...
more
Replacement Franck-Hertz mercury tube (mounted on support plate) for the following products:
Franck-Hertz tube with Hg filling and heating furnace (115 V /50/60 Hz);
item no. : 1006794 or 1023094
and
Franck ...
more
New, worldwide unique spine and skeleton stand! This stand...
• Can be placed on the floor
• Or mounted on a wall!
• Made of nickel-plated steel
This stand works great for 3B Scientific spines and hanging skeleton models ...
more
The neuron cell body depicts a part of the human nervous system in colorful anatomical detail. The neuron model features a typical neuron body with cell organelles, for example mitochondria and many other characteristics of the human cell, ...
more
This myelin sheath model shows the glial cells which build the insulating layer around the axons of the central nervous system. The myelin sheath model is a great addition to any lesson about the human nervous system.
more
This section of the nervous system depicts a Schwann cell with sectioned core. The model depicts the schwann cell in colorful anatomical detail. The schwann cell model is a great addition to any lesson on the human nervous system.
more
The motor end plate model depicts the neuromuscular junction with striated muscle fiber. The motor end plate of the human nervous system is depicted in colorful anatomical detail. The motor end plate model is a great addition to any lesson ...
more
The synapse model features the endoplasmic reticulum, mitochondria and the membranes of the synaptic gap. Also depicted by the synapses model are 5 smaller relief models of the main synapse variations. This synapse model is a great addition ...
more
2 part lower incisor tooth with longitudinal section. This lower incisor tooth is an accurate representative of adult dentition.
The D10 series range from 23-29 cm high.
more
This 2 part lower canine tooth has a longitudinal section. The lower canine tooth is an accurate representation of adult dentition.
The D10 series range from 23-29 cm high.
more
This model is the Lower Single-Root Pre-Molar tooth. The Lower Single-Root Pre-Molar tooth is an accurate representation of adult dentition.
The D10 series range from 23-29 cm high.
more
This 2 part lower twin-root molar has a longitudinal section. The Lower Twin-Root Molar displays cavities. The tooth is a accurate representation of adult dentition.
The D10 series range from 23-29 cm high.
more
The upper triple-root molar tooth is 3 part with longitudinal sections. The tooth has cavity inserts. The upper triple-root molar tooth is an accurate representation of adult dentition.
The D10 series range from 23-29 cm high.
more
This upgrade kit easily converts a P11/1 Patient Care Manikin Basic to a P10/1 Pro version. Save money and upgrade your patient care manikin for more learning and teaching opportunities!
The kit includes:
Lung
Bladder
...
more
High-quality, lifelike and anatomically correct specimens of a house mouse and of a mouse skeleton,which have been prepared by technicians who have been trained at the highest level. Only in this way isit possible to ensure the durability of ...
more
Bone preparation of a pigeon skeleton and, for comparison, a pigeon that is prepared to be lifelike and covered with real feathers. The longevity of the specimen is assured thanks to the frst-class preparation work. In display case.
Dimensions ...
more
'
data-item-price="37.5000"
href="https://www.3bscientific.com/zw/plane-mirror-component-of-optics-kit-for-whiteboard-1002984-u15510-3b-scientific,p_171_1183.html">Plane Mirror -
Component of 'Optics Kit for Whiteboard'
Item: 1002984 [U15510]
'
data-item-price="37.5000"
data-href="https://www.3bscientific.com/zw/plane-mirror-component-of-optics-kit-for-whiteboard-1002984-u15510-3b-scientific,p_171_1183.html"
>
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
'
data-item-price="37.5000"
href="https://www.3bscientific.com/zw/plane-mirror-component-of-optics-kit-for-whiteboard-1002984-u15510-3b-scientific,p_171_1183.html">more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
Application Area:
This product is part of a set of optical components for use in conjunction with a single-beam lamp (item-no.: 1000682 ) or multiple-beam lamp (item-no.: 1003321 ) on a whiteboard (item-no.: 1002591 or 1002592 ).
Product ...
more
This product is a component of the 'Mechanics Kit for Whiteboard' (item no.: 1000735).
Aluminium block with a teflon-coated surface and 2 hooks.
Dimensions: 55 mm × 50 mm × 25 mm
more
Aluminium ring with a blade for determining the surface tension of liquids. Includes a hook and three threads for suspension from a dynamometer.
The tear-off force in liquids is easy to determine, which is why students can conduct the experiment ...
more
Metallophone for demonstrating a C major scale from c² to g². Note labels, frequencies and frequency ratios are printed on the instrument. With striking hammer.
Dimensions: approx. 320x210 mm²
Weight: approx. 510 g
more
Lenses made of high-quality optical glass. Breakage and impact-resistant, set in a slide with magnetic base.
Dimensions: 70x70 mm²
Lens diameter: 36 mm
f = +300 mm
more
Lenses made of high-quality optical glass. Breakage and impact-resistant, set in a slide with magnetic base.
Dimensions: 70x70 mm²
Lens diameter: 36 mm
f = +100 mm
more
Lenses made of high-quality optical glass. Breakage and impact-resistant, set in a slide with magnetic base.
Dimensions: 70x70 mm²
Lens diameter: 36 mm
f = +50 mm
more
Lenses made of high-quality optical glass. Breakage and impact-resistant, set in a slide with magnetic base.
Dimensions: 70x70 mm²
Lens diameter: 36 mm
f = -100 mm
more
Object holder with magnetic base to accommodate optical apertures in slides (50x50 mm2), e.g. single slit N (U8470870) or triple/quintuple slit N (U8478110).
more
Metal rail with millimetre scale and guide slots for accommodating optical components on a magnetic base.
Dimensions: 400x75x10 mm³
Weight: 230 g approx.
more
Single slit slide for mounting in N-model object holder or in the filter slot of the N-model parallel light optical lamp to use in optical experiments requiring a tight single beam.
Dimensions: 50x50 mm²
more
Optical bench made of black anodised aluminium profile with printed millimetre scale.
Cross-section: 70x30 mm² approx.
Length: 500 mm
Weight: 0,6 kg
more
Optical bench made of black anodised aluminium profile with printed millimetre scale.
Cross-section: 70x30 mm² approx.
Length: 1000 mm
Weight: 1,2 kg
more
Optical rider for K-model optical benches (U8475337 and U8475336). With two clamps for diaphragms from the Kröncke optical system or for plates up to 2 mm thick.
Dimensions: approx. 40x50x35 mm³
Weight: approx. 70 g
more
Halogen lamp in cylindrical housing attached to diaphragm screen (100x100 mm²) for mounting on K-model optical riders (U8475350). The filament can be aligned horizontally or vertically.
Halogen lamp: 12 V, 20 W
Terminals: 4 mm safety sockets ...
more
Simple transformer for student exercises. Short circuit proof, with connection leads and two cascadable 4 mm safety plugs.
Safety transformer conforming to EN 61558-2-6
Safe isolation between power supply and output circuits
Specifications ...
more
Simple transformer for student exercises. Short circuit proof, with connection leads and two cascadable 4 mm safety plugs.
Safety transformer conforming to EN 61558-2-6.
Safe isolation between power supply and output circuits.
Specifications ...
more
Tough clamp for diaphragms, filters, diffraction objects and other objects in a slide frame. On diaphragm screen 100x100 mm².
Clamping range: 0.2 – 4 mm
Dimensions: 100x100 mm²
Round opening: 38 mm dia.
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Lenses made of high-grade optical glass. Shock-proof and crack-proof installation in optical diaphragm (100x100 mm²). With focal length specification.
Dimensions: 100x100 mm²
Lens diameter: 32 mm
more
Fresnel mirror with holder for use on K-model optical benches (U8475260, U8475240 or U8475230).
Two mutually inclined surface-coated mirrors are bonded to a common metal plate. A knurled screw at the rear can be used to adjust the angle between ...
more
Photographic diffraction object in a slide frame.
Single slit widths: 0.075 / 0.15 / 0.4 mm
Double slit width: 0.1
Double slit spacing: 0.5 mm
Dimensions: 50x50 mm²
more
Micrometer screw with fine tip for measuring diffraction and interference lines. Holder fits the optical rider K (U8475350).
Dimensions: approx. 80x30x60 mm³
Weight: approx. 120 g
more
Continuously adjustable slit on diaphragm screen 100x100 mm². The slit width can be adjusted by means of a micrometer screw.
Slit width: 0 – 3 mm
Slit height: 25 mm
Dimensions: 100x100 mm²
Weight: approx. 240 g
more
Slide with a triple and a quintuple slit arrangement for mounting in N-model object holder (U8470350) or in the slide slot of the N-model parallel light optical lamp (U8478080-230 or U8478080-115) to use in optical experiments requiring multiple ...
more
The heating chamber can be employed to conduct the Franck-Hertz experiment or the sodium resonance fluorescence experiment in safety. It consists of a powder-coated sheet steel casing with two viewing windows. The front plate is attached ...
more
The heating chamber can be employed to conduct the Franck-Hertz experiment or the sodium resonance fluorescence experiment in safety. It consists of a powder-coated sheet steel casing with two viewing windows. The front plate is attached ...
more
Plug-in power supply with 5.5x2.1-mm co-axial power connector.
Safety transformer conforming to EN 61558-2-6
Safe isolation between power supply and output circuits
Specifications:
Voltage: 12 V AC
Max current: 500 mA
...
more
Plug-in power supply with 5.5x2.1-mm co-axial power connector.
Safety transformer conforming to EN 61558-2-6.
Safe isolation between power supply and output circuits.
Specifications:
Voltage: 12 V AC
Max current: 700 mA
...
more
This metal stand base features extraordinary stability and durability. The 5 large casters ensure that the stand is stable and easy to handle. The base is compatible with all 3B skeletons and the 3B muscle figures B50 and B51.
...
more
Replacement for 1022652 / P102.
The two wound cover sleeves are for the laceration wound on the forearm and the gun shoot wound on the upper arm.
The other wound cover is for the junctional wound in the shoulder.
more
The two wound covering cuffs are used for the laceration wound on the forearm and the gunshot wound on the upper arm
The other wound covering is used for the joint wound in the shoulder area
more
Replacement set of Digital Rectal inserts for the Bowel Care Trainer P16 (1022519)
The different Digital Rectal Inserts are made of SKINlike sturdy silicone to simulate human skin and tissue haptic during DRE and DRS. Each Digital rectal ...
more
The 3B Artificial Hard Stool, categorized under Bristol Stool Chart Type I, is generally designed to enhance the realistic simulation of digital rectal faeces removal.
The product comes in a set of 5 (4 Hard Stools) with 20 pieces of Hard ...
more
Replacement Set for the I.V. Injection Arm P50/1 (1021418) contains:
1 tubing system
1 tube connector
1 tube locking clip
1 disposable syringe
2 injection cannulas 20 and 21 Gauge
1 plastic cup
more
Contraception kit:
1x Coil UT 380, short
1x FemCap™ size: 26 mm
1x Wide seal diaphragm Omniflex, size 75 mm
1x NuvaRing without hormones
1x Female condom, 3-pack
more
The Replacement Skin (20 pc.), Dark Skin is designed for use with the P54 Intramuscular Injection Simulator, facilitating realistic training for intramuscular injection techniques. This set includes 20 durable skin pads that can be pierced ...
more
The geriatric LOR (Loss of Resistance) insert for the Epidural and Spinal Injection Simulator P61 lets you practice with the specific anatomical deformations of the spine of an elderly patient.
You can easily replace the standard patient ...
more
The geriatric LOR (Loss of Resistance) insert for the Epidural and Spinal Injection Simulator P61 lets you practice with the specific anatomical deformations of the spine of an elderly patient.
You can easily replace the standard patient ...
more
The telescopic guide (adult) is used as a replacement part for the BLS (basic life support) simulator Basic Billy. You can find all other parts here.
more
The Complete Baby set for birth simulators, P90 Basic and Pro, contains a fully jointed baby (49 cm / 19,29 inch - 1,06 kg / 2,3 lbs), an umbilical cord with 2 clamps and a placenta. In connection with the birth simulator, fetal positions and ...
more
Interchangeable cervices set for Gynecologic Skills Trainer P91 (1021592).
Easily adaptable to the four different uteri of the Gynecologic Skills Trainer P91.
Offers normal and pathologic anatomical characteristics and will enhance the ...
more
Uteri set for Gynecologic Skills Trainer P91 (1021592)
Interchangeable uteri with externally palpable abnormal pathologies to train diagnostic skills:
Normal uterus which can simulate an anteflexion or a retroflexion ...
more
The spare abdominal cover set for the Gynecologic Skills Trainer P91 (1021592).
Made of 3B Scientific SKINlike high-quality silicone, this abdominal wall will offer during palpation and bimanual examination a realistic look, feel and texture ...
more
The spare vagina insert for the Gynecologic Skills Trainer P91 (1021592)
Made of 3B Scientific SKINlike high-quality silicone, this vaginal insert offers a realistic, flexible vaginal canal.
It will also offer during the palpation and ...
more
The ectopic pregnancy set for the Gynecologic Skills Trainer P91 (1021592)
Set of 2 ectopic pregnancies adaptable to uterus from Gynecologic Skills Trainer P91
more
The transparent reservoir bottle can be filled through the opening centrically located at the bottom surface of the bottle.
Up to 500 mL of liquid can be filled into the reservoir bottles.
The two bottles provided are for the basic or ...
more
1 silicone insert for the Episiotomy and Suturing Simulator P95. Each cut can be sutured several times. Muscle and skin layers can be sutured separately. Suturing the following birth injuries can be practiced:
Episiotomy, for example ...
more
Set of 5 silicone inserts for the Episiotomy and Suturing Simulator P95. Each cut can be sutured several times. Muscle and skin layers can be sutured separately. Suturing the following birth injuries can be practiced:
• Episiotomy, ...
more
Set of 2 replacement insert for the Episiotomy Suture Training Module P96.
Realistic soft skin
Supports the use of real suture instrument
Supports real sutures
Durable reusable skin
Made of late-free material ...
more
Set of 3 replacement inserts for the Episiotomy Suture Training Module P96.
Realistic soft skin
Supports the use of real suture instrument
Supports real sutures
Durable reusable skin
Made of latex-free material ...
more
Cando Cuff Weight are a one size fits all solution for cuff weights. These cuff weights can be used on either the wrist or ankle and are held on by a Velcro strap. Available in weights 1- 25 lbs.
more
Now available with 12 additional auscultation sounds and lowered price.
SimScope® Auscultation Training Stethoscope allows to auscultate Standardized Patients as well as manikins by placing RFID tag sensors on corresponding anatomical ...
more
Includes six sets. Each set consists of one subclavian vein, one internal jugular vein, one external jugular vein, and connectors.
Vein replacement kit for the CVC Simulator.
more
Dual PICC Catheter 5F replacement, 64,8 cm (25.5") long. In order to connect to Chester model, one Universal Catheter Connector, is required. ( Available upon request). This product is nonsterile and not intended for human use.
more
Skin Graft Wound Board is a realistic patient simulation model for educating various individuals about skin grafts and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model. The ...
more
Dehisced Wound Board is a realistic patient simulation model for educating various individuals about dehisced wounds and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model. ...
more
This Incision Wound Board is a realistic patient simulation model for educating various individuals about Incision wounds and their care. Wound cleansing, measurement, and dressing changes can all be easily reviewed and practiced on this model ...
more
Soft, tissue-like body skin shell replacement allows for the palpation of the underlying bony landmarks. The shell is designed to fit over the pelvic and lower spine structure on the Bonnie Bone Marrow Biopsy skills trainer.
more
Soft, tissue-like puncture site skin insert fits into the body skin shell and allows for multiple biopsy procedure simulations to be performed. One puncture site skin insert allows approx. 200 accesses when following provided instructions. ...
more
Replacement plastic tilt base attaches to the Bonnie Bone Marrow Biopsy skills trainer base with included thumbscrews to allow for orienting the trainer for side-lying positions.
more
Five sets of replacement right & left posterior iliac crest bone inserts filled with simulated bone marrow. The inserts can be easily replaced to allow for multiple biopsy procedure simulations to be performed. One five pack of right & left ...
more
Soft, tissue-like puncture site skin insert fits into the body skin shell and allows for multiple biopsy procedure simulations to be performed. Five sets of replacement right & left posterior iliac crest bone inserts filled with simulated bone ...
more
Replacement Ostomy Pouching Trainer Pad™ – Includes 1 Pad and 2 Velcro belts. Available in both light and dark skin tones. Replacement parts for Ostomy Pouching Trainer.
more
Replacement Ostomy Pouching Trainer Pad™ – Includes 1 Pad and 2 Velcro belts. Available in both light and dark skin tones. Replacement parts for Ostomy Pouching Trainer.
more
Replacement urostomy stoma with stents for use with the Ostomy Pouching Trainer. The Urostomy stoma comes with attached tubing to allow you train on pouching and caring for stomas as well as simulating urine output. Can be put in each of the ...
more
Loop stoma for use with the Ostomy Pouching Trainer. The Loop stoma comes with attached tubing to allow you train on pouching and caring for stomas as well as simulating stool output and you add your own bridge to duplicate what you actually ...
more
Flush stoma with for use with the Ostomy Pouching Trainer. The Flush stoma comes with attached tubing to allow you train on pouching and caring for stomas as well as simulating stool output. Can be put in each of the four stoma locations on ...
more
Dissection Training Module allows 3 different types of training:
– vessel dissection
– clipping
– tissue dissection
1. The Vessel dissection module consists of a stand and a disposable, replaceable pad that imitates blood vessels ...
more
The 3mm training trocar is designed and used with the 3mm instruments used in pediatric surgery.
With this trocar, 3mm instruments and with our trainers it is possible to train pediatric surgery, which, due to difference in size, further ...
more
Designed to teach basic skills such as handling and manipulating laparoscopy instruments. These are crucial skills needed to perform more advanced exercises and procedures.
The Dexterity Module allows performing many different exercises ...
more
9 tasks in 1 module.
This module allows exercises that focus on teaching how to manipulate elastic components inside the operating area and give the trainee the ability to understand various types of tension and general elasticity encountered ...
more
Replaceable lung bags facilitate airway management training techniques.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
AirSim Baby X ...
more
This Airway is constructed using CT DICOM data from an adult male, making it visually accurate and anatomically correct. It has been accredited mechanical testing for over 20,000 intubation cycles without fail (under controlled environment ...
more
This Airway is constructed using CT DICOM data from an adult male, making it visually accurate and anatomically correct. It has been accredited mechanical testing for over 20,000 intubation cycles without fail (under controlled environment ...
more
This Airway is constructed using CT DICOM data from a 6-month-old infant, making it visually accurate and anatomically correct. It has been accredited mechanical testing for over 20,000 intubation cycles without fail (under controlled environment ...
more
This Airway is constructed using CT DICOM data from a 6-month-old infant, making it visually accurate and anatomically correct. It has been accredited mechanical testing for over 20,000 intubation cycles without fail (under controlled environment ...
more
This Airway is constructed using CT DICOM data from 6-year-old child, making it visually accurate and anatomically correct. It has been accredited mechanical testing for over 20,000 intubation cycles without fail (under controlled environment ...
more
This Airway is constructed using CT DICOM data from 6-year-old child, making it visually accurate and anatomically correct. It has been accredited mechanical testing for over 20,000 intubation cycles without fail (under controlled environment ...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Each wrap around replaceable skin covering can be rotated and used for 10+ incisions, for efficient and cost-effective tracheostomy and cricothyroidotomy practice.
Before sending your order, please send the serial number of the ...
more
Torso inserts feature three intercostal spaces and facilitate needle decompression of pneumothorax in the 5th intercostal space, with audible hiss heard when performed correctly. Torso inserts also facilitate chest drain of a haemothorax in ...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:  ...
more
Replacement head skin with nasal passage is quick and easy to interchange on site for repairs.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible with:
...
more
Spare Tube for Complete Fine Beam Tube System 1013843.
Gas filling: Neon
Gas pressure: 1.3x10-5 hPa
Bulb diameter: 165 mm
Orbit diameter: 20 … 120 mm
Measurement mark spacing: 20 mm
more
Replaceable Pad for Vessel Dissection Training Module
The Vessel dissection replaceable pad imitates blood vessels in the surrounding tissues. The task is to separate the vessels from the adjacent tissue, thanks to which the practitioner ...
more
Replaceable Pad for Vessel Dissection Training Module
The Tissue Dissection replaceable pad allows 5 types of training. The module was specially designed for laparoscopic training. It consists of a removable, disposable pad that imitates ...
more
Set of spare seals for critical point apparatus (U104001). Includes a rubber cap seal, round rubber seal of diameter 60 mm, square rubber seal 78x78 mm², a sealing ring of diameter 30/20 mm, four copper sealing discs and a threaded bush ...
more
For experiments with fixed and movable pulleys. Non-deformable, low-friction pulleys with cord grooves and hooks at the ends of both axles for suspending from fixed supports or other pulleys. The enclosed design of the plastic frame prevents ...
more
For experiments with fixed and movable pulleys. Non-deformable, low-friction pulleys with cord grooves and hooks at the ends of both axles for suspending from fixed supports or other pulleys. The enclosed design of the plastic frame prevents ...
more
For experiments with fixed and movable pulleys. Non-deformable, low-friction pulleys with cord grooves and hooks at the ends of both axles for suspending from fixed supports or other pulleys. The enclosed design of the plastic frame prevents ...
more
This product is part of the 'Mechanics Kit for Whiteboard' (Item No.: 1000735). It is an excellent tool for introducing the concept of center of gravity and for determining centroids.
Plastic plate with 6 boreholes.
Secure attachment ...
more
Hollow glass bulb with a narrow tube leading out for demonstrating acoustic resonance. The fundamental oscillation is generated by blowing into the opening or banging on the outside of the bulb.
The elasticity and inertial mass of the air ...
more
Hollow glass bulb with a narrow tube leading out for demonstrating acoustic resonance. The fundamental oscillation is generated by blowing into the opening or banging on the outside of the bulb.
The elasticity and inertial mass of the air ...
more
Hollow glass bulb with a narrow tube leading out for demonstrating acoustic resonance. The fundamental oscillation is generated by blowing into the opening or banging on the outside of the bulb.
The elasticity and inertial mass of the air ...
more
Hollow glass bulb with a narrow tube leading out for demonstrating acoustic resonance. The fundamental oscillation is generated by blowing into the opening or banging on the outside of the bulb.
The elasticity and inertial mass of the ...
more
Calorimeter for determining the specific heat capacity of solids and liquids and for measuring the electric heat equivalent. Two mutually insulated aluminum beakers, lid with rubber stopper with boreholes for thermometer and stirrer, with heating ...
more
Plane-parallel cuvette of plexiglas with highly-polished optical surfaces for investigating the paths of light beams in liquids.
Dimensions: 80x30x80 mm³
more
Made of metal, with a knurled screw for feeding the wick and cap for extinguishing the flame.
Contents: 60 ml
Dimensions: approx. 55 x 70 mm diam.
Weight: approx. 50 g
more
Device for demonstrating the ignition of diesel. By swiftly pressing down the piston, the compressed air in the transparent tube is heated so strongly that a piece of paper placed at the bottom of the tube very clearly ignites. Similarly, a ...
more
The quality of the electron beam in electron defraction tube S (1013889) is affected by the resistance between sockets C5 (cathode) and F4 (heating filament) on the tube. For optimum results, the resistance needs to be 390 kΩ. Tube holder ...
more
for W44122
This set includes 4 ears which allow observation of the following pathologies:
Chronic otitis media with large perforation
Attic cholesteatoma (A)
Attic cholesteatoma (B)
Atelectatic middle ear otitis ...
more
The kit contains a big variety of bleeding and non-bleeding wounds. A perfect kit to be added to a manikin.
Bleeding wounds (complete with reservoir bags with pump assembly):
• 1 sucking wound of chest
• 1 laceration of the forearm ...
more
In classroom situations, where no ECG-monitor is available, this Arrhythmia Television Interface (ATI) allows connection of the Arrhythmia Tutor (W49007) to a conventional television monitor. The selected arrhythmia rhythms will be displayed ...
more
One of the finest acoustic scopes available, the 602 Cardiology model combines precision crafted performance with rugged durability. Available in different colors.
more
Alternative to dumbbells - Flexible use during training - Resistance training anywhere, anytime - The Cando disc anchor is an optional accessory for use with Cando exercise bands and tubing. Cando is great for resistance exercise therapy. Place ...
more
Alternative to dumbbells - Flexible use during training - Resistance training anywhere, anytime - The Cando handle with D-ring is an excellent accessory for any resistive band. Bands connect easliy to D-ring and allow for more than one ...
more
Set of 10 3B Scientific® artificial blood concentrate bottle (10 x 250 ml)
Recommended mixing ratio for simulated blood: To 1.5 l water, add 250 ml artificial blood concentrate.
By adjusting the mixing ratio, you can fine-tune the viscosity ...
more
The Injection Pad, Set 2 for P54 is a replacement set for the P54 Intramuscular Injection Simulator. This set includes two high-quality pads designed for repeated use in clinical training
more
Secure the ultrasonic transducers to solid test objects with this special coupling gel, for example the sound trough (from U10020). Contents: 250 ml
more
For use with Infant CRiSis™ Manikins (1005658, 1018146 and 1017248).
Caution: Use only Life/form® Replacements. Do not use conventional latex tubing. This will cause malfunctioning of the simulator.
more
Replacement Neck Skin Attachments for TruCorp Training Manikins. Each wrap-around replaceable skin covering can be rotated and used for 10+ incisions, for efficient and cost-effective tracheostomy and cricothyrotomy practice.
...
more
Torso inserts feature three intercostal spaces and facilitate needle decompression of pneumothorax in the 5th intercostal space, with audible hiss heard when performed correctly. Torso inserts also facilitate chest drain of a haemothorax in ...
more
This UV light-sensitive fluid is designed for use with our condom training models to demonstrate the importance of proper condom usage and avoiding contact with body fluids during intercourse.
Use this UV light-sensitive fluid with our condom ...
more
Although not the same viscosity as real blood, Life/form® simulation blood provides a sense of reality to any activity. For use with Life/form® Advanced Venipuncture and Injection Arm (W44216, W44217); Life ...
more
Although not the same viscosity as real blood, Life/form® simulation blood provides a sense of reality to any activity. For use with Life/form® Advanced Venipuncture and Injection Arm (W44216, W44661); Life ...
more
For use with the Life/form® Adult Tracheostomy Care Manikin (number upon request), Life/form® Patient Education Tracheostomy Care Set (W44460), and Life/form® NG Tube & Trach Skills Simulator (W99834 ...
more
For use with the Life/form® NG Tube and Trach Skills Simulator (W99834), Life/form® Pericardiocentesis Simulator (W486452), and Life/form® Chest Tube Manikin (W44673).
more
Pkg. of 6. For use with Life/form® Heart Catheterization Simulator (W44015); Life/form® Spinal Injection Simulator (W44031); Life/form® Female Catheterization Simulator (W44006); Life/form® Male Catheterization Simulator (W44005); Life/form ...
more
Realistic simulation model to practice and train cricothyroidotomy procedure, created from real patient anatomies (from Computed Tomography).
1-year warranty.
more
Realistic simulation model to practice and train cricothyroidotomy procedure, created from real patient anatomies (from Computed Tomography).
1-year warranty.
more
Realistic simulation model to practice and train cricothyroidotomy procedure, created from real patient anatomies (from Computed Tomography).
1-year warranty.
more
Add realism while practicing patient assessment skills, including observation of swelling of the foot. Edema simulation can be practiced by pressing on the surface of the skin. The foot uses lifelike simulated tissue pads to demonstrate Stages ...
more
The IV Arm is available in a version that connects to the right arm socket of the CPARLENE® manikin. Features realistic vinyl skin and latex veins so the skin actually rolls as you palpate the vein, and the characteristic “pop&rdquo ...
more
The reusable defibrillation pad adapters are designed to be used in place of expensive defib gel pads. They come complete with patient simulator adapters that will enable you to use the patient simulator you already have with the CRiSis&trade ...
more
The reusable defibrillation pad adapters are designed to be used in place of expensive defib gel pads. They come complete with patient simulator adapters that will enable you to use the patient simulator you already have with the CRiSis&trade ...
more
The reusable defibrillation pad adapters are designed to be used in place of expensive defib gel pads. They come complete with patient simulator adapters that will enable you to use the patient simulator you already have with the CRiSis&trade ...
more
Do you already have a CRiSis™ Manikin? Upgrade with heart and lung sounds now! Provides everything needed to add heart and lung sounds to an existing CRiSis™ manikin. Includes upper torso, chest skin, remote, and SmartScope&trade ...
more
Carrying case for Advanced “Airway Larry” Trainer Head with Stand. Can also be used with “Airway Larry” Airway Management Trainer with Stand (1005633) and Adult Airway Management Trainer with Stand (1005596).
more
One set of RFID tags contains 15 patches which are to be placed on anatomically correct locations on either manikins or Standardized Patients. Each patch has a label indicating its dedicated anatomical location, to make sure the sounds are ...
more
Base plinths for intubation manikins provide stability and protection during airway management training.
Before sending your order, please send the serial number of the current model this spare part is intended to be used.
Compatible ...
more
Optional IV arm for Keri Complete Nursing Manikin W44075.
Features replaceable skins and latex veins that actually roll when palpated. A reaslistic flashback confirms proper needle placement and the shoulder can be used for intramuscular ...
more
A hard-sided case for convenient storage of torso manikins, simulators, replicas, plus other supplies. Size: 31" x 17" x 12". Use with “Airway Larry” manikins, CriSis™ Torso manikins, and CPARLENE® manikins.
more
• Defibrillation shock can be delivered through manikin or simulator
• Practice operating your defibrillator/external pacer without a manikin. Connect defibrillator/external pacer to simulator using adapters
• Built-in circuitry ...
more
Add an injection simulator to the W45031, W45047, or W45062
Features of the injection arm include:
• I.V. Injections
• Soft hand for finger prick practice
• Radial and brachial arterial sites
This I.V. injection arm ...
more
For use with W46507/1
The Port Access Arm, which can be ordered to upgrade your existing Chester Chest, has a dual lumen 5Fr PICC (Peripherally Inserted Central Catheter) exiting the basilic vein from the inner bicep area, which is ...
more
For use with Life/form® Auscultation Trainer and Smartscope™, W44119, and Life/form® Auscultation Trainer and Smartscope™ and Amplifier/Speaker System, W44119P
more
Practice Port (IVAD), only for use on simulator. Used as a replacement part for the CVC (central venous catheter) simulator Chester Chest™ W46507/1
more